• Content
  • Comments (0)
  • Related articles
Oct
08
2012

How to open and change display on Toshiba Satellite A200-23W Monday, 8 October 2012

Disassembly instructions guide for Toshiba Satellite A200-23W. Here we cover the first and most important part, remove front cover, display assembly and display panel. After opening the case, remove the motherboard is a simple procedure so not worth mentioning.

STEP 1 - remove external covers STEP 1 - remove external covers STEP 1 – remove external covers

  • remove the battery
  • remove the memory cover and memory module (if is needed)
  • remove hard drive covers and HDD units (if is needed)
STEP 2 - remove keyboard STEP 2 - remove keyboard STEP 2.2 - remove keyboard STEP 2.2 - remove keyboard STEP 2.1 - remove keyboard STEP 2.1 - remove keyboard STEP 2.3 - remove keyboard STEP 2.3 - remove keyboard STEP 2 – remove keyboard

  • remove keyboard upper frame
  • remove two screws securing the keyboard
  • lift up the keyboard and disconnect data ribbon

 

STEP 3 - prepare to remove upper case STEP 3 - prepare to remove upper case STEP 3 – prepare to remove upper case

  • remove all screws from the bottom
  • remove screw securing the optical unit and remove the unit
  • remove the screws in the battery seat
STEP 4 - disconnect cables STEP 4 - disconnect cables STEP 4.1 - disconnect cables STEP 4.1 - disconnect cables STEP 4 – disconnect cables

  • touchpad data ribbon
  • antennas cables from the wireless card
  • webcam data ribbon
  • webcam microphone cable
  • left / right speaker cables
  • bluetooth data ribbon
  • upper control buttons data ribbon
STEP 5 - remove upper case STEP 5 - remove upper case STEP 5.1 - remove upper case STEP 5.1 - remove upper case STEP 5 – remove upper case

  • make sure you have unwrapped the cables
  • remove upper case frame
  • gently remove the case
STEP 6 - remove display with cover STEP 6 - remove display with cover STEP 6.1 - remove display with cover STEP 6.1 - remove display with cover STEP 6 – remove display with cover

  • remove four screws securing the display joints
  • make sure you have unwrapped the cables
  • gently remove the display
STEP 7 - remove LCD panel STEP 7 - remove LCD panel STEP 7.1 - remove LCD panel STEP 7.1 - remove LCD panel  STEP 7 – remove LCD panel

  • remove LCD frame side screws
  • remove LCD – PCB screw
  • pull up the LCD panel

 

Post a Comment

Your email is never published nor shared. Required fields are marked *

*
*